Using the Apple Watch App for Eagle and Ace Licenses
- Wear your Apple Watch on your lead wrist!
- From the Home Screen on the 4D Motion App on your iPhone, select Analyze your Swing.
- When prompted to select a device, select Apple Watch. Make sure that the 4D Motion Watch App is open and in the foreground.
- On the Watch, press and hold the green button on the Apple Watch until transfer is complete.
- At first transfer, give 4D Motion Bluetooth*, location** and health*** access: a popup will appear on the watch. Give the app access by turning on the toggles for each requested permission. Please note: If you don't give the app access to Bluetooth, location and health, you won't be able to capture your swing with the Apple watch app.
- After giving access, keep pressing the green Start Analysis button until you see Swing Now.
- When you see Swing now on the watch, the transfer is complete.
- Watch video below to see how this is done:
You are now ready to make swings.
- The app will notify you after each swing, and you’ll see the swing data displayed on the watch. The red flaws are shown first, then the rest. Use the digital crown to scroll down.
The 3 tabs on the 4D Motion Watch App during the Analysis:
Main screen
Swipe left to Stop your Analysis session.
Swipe right to see status.
You can switch between these tabs by swiping left and right.
- The default tab is the middle one: it either shows “Swing now” (i.e. no swings detected yet), or you can see the stats of your last swing.
- Swipe right: STOP button. Press this button if you want to stop your Analysis session.
- Swipe left: Garment status indicator and battery level.
- If you stay within range of your iPhone, the swings will sync from your Watch to your iPhone and be visible right away in the iPhone app. If you go out of range, the swings will download on your mobile device once you are within range.
- When you are finished with capturing, swipe right on the Apple Watch app. Press the Stop button, confirm that you want to finish the Analysis, and the session will stop.
*In case Bluetooth access was not granted during setup,
- Open the iOS Settings app
- Find the 4D Motion app in your app list.
- Turn on the Bluetooth toggle in case it is not already on.
- If the steps above do not help: reboot your iPad.
** In case the Location access was not granted during setup,
-
- Open the iOS Settings app
- Find the 4D Motion app in Apps
- Select 4D Motion from the list
- Select Location
- Enable location access while using the App
- Turn on Precise Location
*** In case the Health access was not granted during setup,
-
- Open the iOS Settings app
- Find the Health settings
- Open Data Access & Devices
- Select 4D Motion
- Turn on the toggle for Workouts and Heart Rate